We carry the entire line of ATI Prochargers. Automotive, truck, and marine applications are available! Contact us for application and pricing information !!!
V-8 F-150 P-1SC applications-
$3995.00 Polished $3787.64 Satin
Procharger
supercharger systems are absolutely the most powerful and reliable supercharger
systems available for your vehicle. Nothing else even comes close! This is
possible only because the quality and design of Procharger systems are simply
second to none. Of course the most important component is the supercharger
itself, and Procharger superchargers are absolutely the most powerful and
durable superchargers available - for any airflow requirement. And for customers
who want additional power and reliability beyond that possible from a
supercharger alone, ATI is the only company which offers an integrated
air-to-air intercooler system, the same type of intercooler system that is
standard on millions of OEM forced induction applications worldwide. Others may
imitate, but Procharger technology is the best you can buy.
Procharger Superchargers
Procharger systems outperform competing products across virtually every objective performance criteria. And while every manufacturer would like to believe their products are the best, a consumer can evaluate whose claims are true by evaluating the facts behind the products. For example, the product with the best warranty coverage is probably more reliable than a similar product with less warranty coverage. Why? Because if a product breaks under warranty, the manufacturer must pay for the repair, so manufacturers of less reliable products offer shorter warranties so they can charge their customers rather than incur the expense themselves.
Similarly, in the case of supercharging it is possible to evaluate the efficiency of a supercharger system simply by noting whether a product requires the use of ignition/timing retard, which is used to fight excessive heat. For example, if an 8 PSI supercharger system requires the use of ignition retard to avoid detonation (engine "knock", from excessive heat), while a 17 PSI supercharger system is able to run full timing on the same motor, then you know that the 17 PSI supercharger system, even at more than twice the boost level, is producing less heat than the 8 PSI system.
You simply can't argue physics. And if a manufacturer or one of their dealers makes a claim that is from "internal testing" and has never been documented by an independent third party source, a consumer should probably be skeptical. While much of this is common sense, supercharger systems are technical products, and with a technical product it is not always easy to determine how things really work or which product is best for you.
Please contact our Ford FACTORY-TRAINED and ATI authorized specialists for more information!
OUR P1-SC installation on Project 2002 after only an air filter swap. Fuel system upgrades have been ordered. We never intended to upgrade the fuel system. Out of the box, this setup will easily push an F-150 down a 1/4 mile drag strip in the HIGH 13-second range.
With higher boost levels and a full-race tune, this unit is capable of low 13s to high 12s in an F-150 (in street trim)! On Project SCREW, the P1-SC (12PSI) put 374 HP and 430 FT/LBS of torque to the ground! Project Tenderizer put 480 HP and 528 FT/LBS to the ground with the D-SC!!!
Weighing in at 5400 lbs, Skid's SuperCrew documented a 12.99 @ 105 MPH with a Diablo chip, fuel mods, and a 50 shot. It is a nice sleeper!
Remember- service, installation and warranty support is what we are all about!!!
Tuning is provided by www.ModularDepot.com
$3995.00 Polished $3787.64 Satin
These kits are custom built per order.
Shipping charge is $78 in the continental U.S. and ATI drop ships the kit to your door.